TORCHSTAR LED Safe Lighting Kit, (6) 12 Inch Linkable Light Bars + Motion Sensor + UL Power Adapter, 900LM, Input 100-240V, for Under Cabinet Gun Safe Locker Closet Showcase, 5000K Daylight

Using these in a safe to replace the factory lights that quit working after about 8 years. These are much brighter than the original and were easy to install. Motion sensor works well, lights turn on as soon as the door is opened. The entire strip lights up, no dead areas and long enough to cover the entire perimeter of the inside. Hopefully I get 8 or more years out of this set as well. Would recommend for safe lights, but wonder if the motion sensor is too sensitive for under cabinet or a closet. Great product at a good price.

I bought this LED set to light up the interior of my safe. My safe is in my garage which has lights but they are not nearly bright enough to make finding things in the back of my safe easy. This set has six LED bars that come off of a motion sensor. The sensor has two power lines so the lights can be strung from a central point going opposite directions or the bars can be strung in a single chained line going one direction. My light set also contained spacer wires so the light bars could be spaced further apart to meet different configurations if needed. One nice feature besides the spacer wires is the fact that all the light bars and the sensor come with sticky tape on them. I had no problem mounting all the components to my safe walls which have the felt like covering most safes come with.So just a few things about the lights and installing them. First, these lights are very bright, far brighter than I expected and more than enough to light up my safe as you can see in the picture. My garage lights are on but the lights in the safe make them seem feeble. I mounted the lights going up the sides on the front inside corners and mounted the sensor on the side wall by the safe door. Play with the setup before pulling the sticky tape. Depending on the size of your safe you may want to arrange the lights differently and you don't want to ruin the adhesive on the tape before you are ready to mount them where you want them. Second, I suggest going to a craft or fabric store and getting some Velcro wrap, which is hook on one side and loop on the other so it's all one piece. I used this to secure and cover the longer run wires which: a) I think looks better and b) Keeps the wires safe and out of the way when putting things in or taking things out of the safe. One last thing, mount the sensor close to door where it is least likely to get blocked. I was tempted at first to hide it in the back where it would be less noticeable and less wire to hide, but as the safe fills up the sensor is less likely to see through the massive forest of steel barrels and stocks. I ended up mounting mine on the sidewall near the door opening and covered the wires with the Velcro tape. The sensor turns on when the door opens.To wrap it up, these lights are bright, easy to install, has flexible installation options, the sensor works great, and I would buy these again without question.

Bought this for a safe and finally got around to the install today. All works great. Only issue right now is that the leads from motion detector could be a longer. It came with screws and also velcro strips that can attach to the double sided tape. If your safe has carpet type material, these strips come in real handy as you will not need the screws. Cause i'm a neat freak it took me a little while to run and tuck the wires to where they were not visible.....the motion detector was placed down at the bottom of the center portion and lights turn on immediately when the door is open. Overall, satisfied with the install and lighting.

The media could not be loaded. This seems to be a really good value product compared to other safe-lights you can buy. I have a smallish safe (56x29) and the six wands fit nicely. Lots of good white light. Situated 2 wands on each side, and one at the top and last one at the bottom of the safe. Setup is fairly simple and the instructions are very thin, but you can figure this out. They provide a lot of lead wire to get the setup you need if your safe is larger or smaller. The motion sensor works really well - very sensitive.I will say that the "3M" tape strips on the light wands is pretty weak and would not recommend relying on them to stay in place. I used them to get the light in a position I wanted and then used the included screws to fasten the light to the safe. The downsides here are that if you have to be a contortionist to use your drill to fasten the screws in backwards at weird angles, and the wires are practically on top of the tab you drill the screw into making it a bit of a pain to fasten them without damaging the wires. Be patient and take your time with that step.

This lighting Kit is an excellent addition to any gun safe, providing bright, even illumination that makes it easier to access your firearms and valuables. The kit includes motion-sensing lights that activate when the door is opened, ensuring visibility without the need to fumble for a switch. Installation is quick and simple. Overall, it's a practical and affordable solution for enhancing safety and convenience in your gun safe

Easy to install and works well. Turned my dark cave of a safe into a well lit area