Mount-It! MI-203 Low Profile Fixed TV Wall Mount | Fits 13-32 Inch Screens | VESA 75x75 & 100x100 | Heavy-Duty Steel with 60 Lbs Capacity | Built-in Bubble Level | Ideal for RV, Home, and Office

I used it to mount a 20” monitor near my networking equipment in the basement. Easy to install and feels very secure. I wouldn’t use this for a larger TV in a family room, but for the price and my application, it’s perfect. One nice feature: the screws that lock the monitor or TV to the wall portion of the mount can be used for minor leveling if needed.

The tl;dr: if you need a little, light mount for a little, light TV, this works well but must be frustratingly screwed together at the end in only a few inches' space. I just purchased my second mount for my second 32-inch workout-TV setup, so I'm happy with build quality and price. This mount was easy to install: the base to screw on the wall has a built-in level. A few sets of screws of different diameters were provided for the second piece; one set fit our new TV, although we had to add extra washers. The hard part was screwing the two pieces together once the TV was mounted on the wall. It was a tight fit. We finally stood on a stepladder and used needle-nose pliers to set the screw, then gently used a screwdriver to drive it. If you don't have manual dexterity, get a different mount--one of the ones where you tug on straps to release the TV. Otherwise, this one works well.

This little mount works very well. The two halves separate - one attaches to the monitor that was equipped with 100x100 mm VESA mounting plate. After that, you simply position the monitor slightly above and in front of the plate, push it in and let it drop down to its mounting position. Two screws on the top (I needed a long philips head screwdriver to reach them since the monitor is quite near the wall) secure the top half to the bottom half.

It keeps the (in my case) the monitor close to the wall and is easy to install to wall. The design for attaching the monitor to the part mounted to the wall is a great design. However, be aware that because it is so tight to the walls you have to plan well for cabling.I liked it enough that I bought a second one.

This works well and is easy install. All needed installation hardware is included. This is really designed for Tv's or monitors that have the wires coming out of the bottom. It's very close to the wall so wiring coming straight out of the back might not work.

Overall, it works, and I'm happy, but the design could be improved. I used this to wall mount the main monitor at the center of my home music studio.First of all, the level fell out when trying to place the wall plate, so (no biggie) I had to use my combination square. Second, those "mating screws" that tie the two plates together are impossible to access the way my monitor is shaped. So I have that "akilter" situation others have mentioned. I think some better engineering would be of value for those issues.Third, there seems to be no option for drywall mounting - only 2 mounting holes. Mine had parts and instructions for stud or concrete mounting. I get that if you are mounting a huge TV. For a monitor :: not only are most modern monitors super light, but you can't always find a stud (nor is there concrete) anywhere near center of where your keyboard is placed. So the wall plate needs 4 holes on the outer perimeter to be used with drywall anchors.

If you need a small mount that holds the TV close to the wall and don't need tilt capabilities, this will do exactly that. However, if you need to secure it so that it cannot fall off the wall, such as in an RV like I did, prepare to be frustrated. The 2 screws that go in from the top are extremely difficult to insert because only the lower plate is threaded. When you hang the TV-side bracket on the wall-side, it'll pop those 2 screws right out. You either need a second person to hover the monitor just above the two touching so you can use a long screwdriver to get the screws to thread, or a super long phillips with sufficient magnetism to carry the screws all the way down.

This Mount works great. I'm pulling one star because the screws for the wall anchors are just a tad too small; the work OK, but you can pull them out of the plastic anchors with a little bit of effort.To reviewer CJW who complained that the male and female plates were not a snug fit and they had to shim the bottom to prevent the screen from angling down:The same thing happened to me and then I remembered that there were two little set screws that go into the top of the connection area of the plates which lock the two together. When you align the holes for these set screws, that downward tilt is taken up and the whole thing locks solid. Depending on the size of screen you are mounting, accessing them could be a challenge; I was lucky and was just mounting an electronic picture frame.Maybe you forgot about those set screws?